AO Smith Water Heater

Getting A New Water Heater and Why A Quality Brand Like An AO Smith Water Heater Is Worth The Extra Cost

When the water heater in your home finally goes out, and they always do eventually, then you have a decision to make. You can almost always go down to the big home improvement store and get a cheap one, install it, and be done, for awhile. But, the really inexpensive water heaters never last like the higher quality ones do, plus they have poorer insulation that makes your energy bills higher every single month. Here are some tips on choosing a new heater and why the AO Smith water heater brand is always a good choice.

First: The Signs You Need A New Water Heater

Most of the time when your water heater starts to go, you’ll know right away because it’s real obvious. The sure sign of death is if the heater tank itself has sprung a leak. The tanks are made from steel and they eventually rust through from the inside out and will begin to leak. There is nothing you can do to fix it, even if you could, it would only start to leak in a different spot since it’s rusted all over inside.

The next problem will be if it stops heating your water. There are a few things that can be fixed if you know what you’re doing. There are usually two heating elements and two thermostats that regulate the temperature of the water in your heater. It’s complicated to explain, but the top heating element in a dual element tank will come on first and when it’s done heating the top half of the tank, it switches off the lower heating element comes on and finishes the job.

The problem arises when a homeowner doesn’t realize this sequential operation and then ends up replacing thermostats and elements because they think they aren’t operating as they should. If you aren’t familiar with the operation of your water heater, it’s best to call a plumber or completely replace the entire unit, which is much easier than replacing the parts. Plus, most people can easily hook up a replacement water heater since it should go in exactly the same way the old one came out.

Reasons Why You Should Consider A Top Quality Brand Like AO Smith

The most important reason to buy top quality when replacing your water heater is to avoid poor quality. That sounds like an obvious statement, but if you’re going to have to pay a plumber to come to your house and install the unit, you’ll save money because the top quality, like a AO Smith water heater, will last much longer than the cheap, no name brands that you’ll always find at the store. The cheap brands will rust out sooner, the elements will burn out more often, the thermostats will wear out and the pressure relief valve won’t last either. They are just made as cheaply as possible to get you to buy them.

Plus, they usually don’t have the same amount of insulation surrounding the tank so they will be using a higher amount of energy each and every month. You can almost always compare the energy usage by looking at the label that is on the side of the tank at the store. If you don’t understand it, have the sales clerk pull out his calculator and punch in the numbers so you get a solid idea of the difference in cost per month. There can be a large cost difference. Then consider the lifetime of the AO Smith water heater versus the cheap brand, figure in the cost of installation by a plumber, or even your own time if you’re a do-it-yourselfer. You’ll always come out on top paying a little bit more and getting top quality.